非標扭力扳手檢定儀定制注意事項：市面上銷售的扭力扳手檢定儀都是標準型的。如果用戶需要購買扭力扳手檢定儀但是標準的扭力扳手檢定儀卻無法滿足您的測力需求，這個時候您就可以選擇有能力的扭力扳手檢定儀供應商，讓他們?yōu)槟鷮ｉT定制一套特殊的扭力扳手檢定儀。那么，如果需要定制扭力扳手檢定儀我們?cè)撟⒁庑┦裁茨兀恳蚬?yīng)商提供哪些資料呢？定制扭力扳手檢定儀之前一定要問清楚供應商有無能力承接扭力扳手檢定儀非標定制的單子，確認好后將你的要求告訴給供應商，讓其為你設計一套符合要求的扭力扳手檢定儀，確認好后就可以投入制作了。
Notes for customization of non-standard torque wrench calibrator: all torque wrench calibrators sold on the market are standard. If the user needs to buy a torque wrench calibrator, but the standard torque wrench calibrator can't meet your demand for measuring force, then you can choose a capable torque wrench calibrator supplier, and let them specially customize a set of special torque wrench calibrator for you. So, what should we pay attention to if we need to customize the torque wrench calibrator? What information should be provided to suppliers? Before customizing the torque wrench calibrator, it is necessary to ask the supplier whether he is able to undertake the non-standard customized list of the torque wrench calibrator. After confirmation, tell the supplier your requirements, and let him design a set of qualified torque wrench calibrator for you. After confirmation, it can be put into production.
定制扭力扳手檢定儀還需注意下面幾點：
The following points need to be paid attention to for the calibration instrument of customized torque wrench:
點：材料。我們都知道，這類扭力扳手檢定儀都是金屬材質的，但有些生產商偷工減料，不采用實心金屬，甚是以別的材質來替代，這不僅讓扭力扳手檢定儀沒有實用性，甚是無法長久工作。所以說，對于定制生產商的所用材料，我們一定要明確好，當然，扭力扳手檢定儀的定制也要如此。
Point: material. As we all know, this kind of torque wrench calibrator is made of metal, but some manufacturers cut corners, do not use solid metal, or even replace it with other materials, which not only makes the torque wrench calibrator not practical, or even unable to work for a long time. Therefore, we must be clear about the materials used by the customized manufacturers. Of course, the customization of the torque wrench calibrator is also necessary.
第二點：基礎設施。這類扭力扳手檢定儀的基礎設施有很多，測力儀表，扭力扳手檢定儀把，傳感器等等，這些設施中任何一個存在問題，該扭力扳手檢定儀都不具備使用優勢，更不要說測重了。所以說，在定制時，基礎設施也要與生產定制商確定好，其他扭力扳手檢定儀的定制也要如何。
Second, infrastructure. There are many infrastructures of this kind of torque wrench calibrator, such as force measuring instrument, torque wrench calibrator handle, sensor and so on. If any of these facilities has problems, the torque wrench calibrator does not have the use advantage, let alone the weight measurement. Therefore, during customization, the infrastructure should be determined with the manufacturer, as well as the customization of other torque wrench calibrators.
以上兩點，就是我們?cè)诙ㄖ婆ちΠ馐謾z定儀時考慮的情況，該扭力扳手檢定儀的定制材料，基礎設施，都不可忽視。當然，對于生產定制商，我們也要特別注意，要選擇知名度高，服務態度好的商家，如此所定制出來的扭力扳手檢定儀，才有使用的保證。
The above two points are considered when we customize the torque wrench calibrator. The customized materials and infrastructure of the torque wrench calibrator cannot be ignored. Of course, we also need to pay special attention to the customized manufacturers. We need to choose the high-profile and good service attitude merchants, so that the customized torque wrench tester can be used.
