在風電設備安裝，石油化工裝置法蘭安裝，油、氣、水等等行業管道安裝，為保證法蘭安裝質量控制達到預緊密封效果，我們一般建議使用多同步定力矩扭力扳手預緊方案。其中，對于法蘭預緊扭力較大，精度要求較高的工況，我們建議使用液壓扭力扳手同步預緊。那么液壓扭力扳手的同步預緊到底指什么
In the installation of wind power equipment, petrochemical plant flange installation, oil, gas, water and other industries pipeline installation, in order to ensure the flange installation quality control to achieve the best pre tightening sealing effect, we generally recommend using multi synchronous constant torque wrench pre tightening solution. Among them, for the flange pre tightening torque larger, higher accuracy requirements of the working conditions, we recommend the use of hydraulic torque wrench synchronous pre tightening. So what exactly does the synchronous pre tightening of hydraulic torque wrench mean
同步預緊實質就是采用均勻螺栓預緊力，在規則法蘭面同步對角采用同等套設備同等扭力輸出同時作業，從而達到受力面的平行均衡受力。理論來講，全覆蓋同步預緊效果肯定是更好的。但在液壓扭力扳手，目前同臺泵站更多可以做到拖四部扳手同時工作。因此，一般來說液壓扭力扳手同步預緊選擇肯定是一拖四。
The essence of synchronous pretightening is to use uniform bolt pretightening force, and use the same set of equipment with the same torque output at the same time in the synchronous diagonal of the regular flange surface, so as to achieve parallel and balanced stress of the stressed surface. Theoretically, the effect of full coverage synchronous preloading is definitely the best. But in the hydraulic torque wrench, at present, the same pumping station can pull up to four wrench at the same time. Therefore, generally speaking, the best choice of hydraulic torque wrench synchronous pre tightening is definitely one drag four.
但因為各現場設備數量和成本投入限制做不到四同步的也可以使用一臺泵拖兩部扳手的2同步作業，雖然效果和效率不及四同步，但肯定要好于單步扳手逐一鎖緊的效果。
However, due to the limitation of the number of field equipment and cost input, if the four synchronization can not be achieved, the two synchronization operation of one pump dragging two spanners can be used. Although the effect and efficiency are not as good as the four synchronization, it is certainly better than the effect of one-step wrench locking one by one.
當然，液壓扭力扳手同步預緊主要是針對法蘭面的預計安裝，如果工況螺栓分布不規則就沒有必要考慮同步預緊，使用單步扳手預緊就可以。
Of course, the hydraulic torque wrench synchronous pre tightening is mainly for the flange surface is expected to install, if the distribution of bolts is irregular, there is no need to consider synchronous pre tightening, using a single step wrench pre tightening can.
Today's wonderful content is provided by electric torque wrench. We sincerely provide you with satisfactory service. If you have any questions or questions, please call us or enter our website: http://m.bjqunyao.com
