扭剪扳手速度慢怎么辦？
What if the speed of the torsion shear wrench is slow?
一般扭剪螺栓越大，使用扭剪扳手時速度會相對較慢，扭剪扳手要達到一定的扭力才能把扭剪螺栓擰掉。
Generally, the larger the torsional shear bolt is, the slower the speed will be when using the torsional shear wrench. The torsional shear wrench must reach a certain torque to screw off the torsional shear bolt.
如果想要速度快一點的話，可以先初緊，用扭矩扳手或者沖擊扳手進行初緊，初緊到60%左右，再用扭剪扳手進行終緊，這樣速度會更快一些。
If you want to speed up, you can tighten initially with a torque wrench or impact wrench. The initial tightening is about 60%, and then the final tightening is carried out with a torsion shear wrench. In this way, the speed will be faster.
另外扭剪扳手不需要調節扭力，只需要更換相同型號的套筒就可以，扭力是調節好的，不像定扭矩扳手需要跟據工程需要調節扭力。
In addition, the torque shear wrench does not need to adjust the torque, but only needs to replace the socket of the same model. The torque is well adjusted, unlike the constant torque wrench, which needs to adjust the torque according to the needs of the project.
The above is a detailed introduction about the color steel plate manufacturers. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://m.bjqunyao.com
